TEMPERATURE
CONTROLLER - PROGRAMMABLE (4 Digit, 1 Output)
|
|
|
|
Model
/ Function |
Tempx
911 |
Tempx
711 |
Tempx
411 |
Size |
(96 x 96 x 74) mm
Refer Size (1) table |
(72 x 72 x 74) mm
Refer Size (2) table |
(48 x 48 x 92) mm
Refer Size (3) table |
LED Display |
4 Digit, 0.5” Height
|
4 Digit, 0.5” Height |
4 Digit, 0.39” Height |
Setpoint |
Single set point
temperature controller. |
Input Sensor &
Range |
1)
RTD, Pt 100 : -99.9 to 199.9 , 0 to 600°C
2) J ( Fe - K ) Thermocouple
: -100 to 750°C
3) K ( Cr - Al ) Thermocouple
: 0 to 1350°C - Selectable.
|
Control
Mode |
1)
On - Off,
2) Time Proportional - Selectable,
with programmable on - off band / proportional
band / cycle time / reset (offset) value. |
Control
Action |
1)
Heating Action,
2) Cooling Action - Selectable
, with delay time for compressor - start. |
Accuracy |
+/-
0.25 % of full scale or 1°C, whichever
is greater. |
Power
Supply |
90 to 250 VAC/DC
@ 50/60 Hz.( 24 VAC/DC provided on request) |
Output
|
1CO Relay (NO-C-NC)
, with 5A @ 230VAC / 24 VDC ratings.
For SSR 12VDC,20ma output
provided on request. |
General
Features |
Temp. Setting
by key pad , Led indication for Relay status
,
Mounting : Panel mounting type. |
|
|
TEMPERATURE
CONTROLLER - PROGRAMMABLE (4+4 Digit, 1/2 Output) |
|
|
|
Model
/ Function |
Tempx
922 |
Tempx
722 |
Tempx
422 |
Size |
(96 x 96 x 74) mm
Refer Size (1) table |
(72 x 72 x 74) mm
Refer Size (2) table |
(48 x 48 x 92) mm
Refer Size (3) table |
LED
Display |
4+4
Digit, 0.5” Height |
4+4 Digit, 0.39” Height |
4
Digit Process Value + 4 Digit Set Value |
Setpoint |
Single / Two set
point temperature controller. |
Input Sensor &
Range |
1)
RTD, Pt 100 : -99.9 to 199.9 , 0 to 600°C
2) J ( Fe - K ) Thermocouple
: -100 to 750°C
3) K ( Cr - Al ) Thermocouple
: 0 to 1350°C - Selectable |
Control
Mode |
1)
On - Off,
2) Time Proportional - Selectable,
with programmable
on - off band / proportional band / cycle
time / reset (offset) value. |
Control
Action |
1)
Heating Action,
2) Cooling Action - Selectable
, with delay time for compressor - start
. |
Accuracy |
+/-
0.25 % of full scale or 1°C, whichever
is greater. |
Power
Supply |
90 to 250 VAC/DC
@ 50/60 Hz.( 24 VAC/DC provided on request) |
Output
1 & 2 |
1CO Relay (NO-C-NC)
, with 5A @ 230VAC / 24 VDC ratings.
For SSR 12VDC,20ma output
provided on request. |
General
Features |
Temp. Setting
by key pad , Led indication for Relay status
,
Mounting : Panel mounting type. |
|
|
OVER
ALL / MOUNTING DIMENSIONS ( All Dimensions in
mm.) |
|
SIZE
/ DIM |
A |
B |
C |
D |
E |
F |
SIZE - (1) |
96 |
96 |
74 |
10 |
92 |
92 |
SIZE - (2) |
72 |
72 |
74 |
10 |
69 |
69 |
SIZE - (3) |
48 |
48 |
92 |
4 |
46 |
46 |
|
|
|
|
Paragon auto control |
Timer Count down |
Level Control |
Time Switch |
Delay Timer |
Temperature Controller |
PID Controller |
Digital Preset Counter |
Hour meter |
RPM meter |
Process control Instruments |
Digital Counter |
Industrial Automation |
24 hour timer |
Time totaliser |
Weekly Programmable Timer |
Proximity control Unit |
Length Counter |
Plug In Timer |
On off timer |
Temperature Indicator |
Liquid Level sensor |
Process Indicator |
Digital Timer |
Din Rail Timer |
Single Phase Preventer |
Rpm indicator |
Phase Failure Relay |
Digital Preset Timer |
|
|
|
|